Golf Club Iron Sets

What you’re looking for is a set of clubs to give you a more consistent game, complete your strengths and reduce any weak parts of your game. A set of custom built clone golf club iron sets will work for your game much better than any stock clubs you might try.

To play clubs that suit your own game, you need to examine the individual components that make these up, as opposed to starting with a finished club. This might seem strange, but as we break down the golf club into its parts, you’ll begin to see the bigger point of the execise.

Club Heads
For inconsistent golfers, club heads should have game improvement features like bigger volume, lower center of gravity, cavity backed irons, wider soles and increased MOI (Monent of Inertia). All these are some of the features you can find on good custom clone golf club iron sets.

For the better golfer, club heads might have more playability features like thinner toplines, less offset, smaller cavities on irons and smaller profiles. Clone golf club iron sets aren’t just for the high handicaper. The consistent striker will find plenty of workable designs as well.

Club Shafts
For most club builders, myself included, the most important ingredient of how well a club plays is the shaft. Apart from keeping the club in one piece of course, the golf shaft performs one single function. Get the club head to the ball in a square position.

Using a shaft that is too stiff, could well open the club head at impact, usually ending up in a big slice and considerable reduction in yardages.

On the other hand however, if your clubs use shafts that are too soft, you’ll close the club head at impact and the left hand rough will be your playing ground (for right handed golfers).

In an ideal world, stiff would play stiff and regular would be regular. That’s not the case though as how a shaft plays is affected by the torque, weight, bend point and tip stiffness of the shaft as well. A shaft rated stiff with high torque and a softer tip will feel softer than a regular with low torque and a stiff tip.

Grip Size
Often ignored, the how your clubs play for you has a lot to do with the size of the grips. Using undersized grips can close the club at impact usually bringing a hook into play. Grips that are too big can leave the club open, usually meaning a big left to right slice (for right handed golfers).

The Assembled Club
It’s not only the individual components of your golf club iron sets you need to get right though. Your clubs will only play as well as the matching of all these components.

Based on your physical characteristics, you could well need clubs with shorter or longer then standard lengths. The angle the club rests at during address has a lot to do with how your clubs will perform.. This is referred to as the lie angle of the club. Get the lies wrong and you could well be fighting pulls and pushes.

For most golfers their irons usually includes a favorite. An iron they just seem to hit more consistently. That might be down to the lie angle of that particular club. Even top of the range off the rack irons have variations in the lie angles. A high price tag is no guarantee that the clubs will have the right lie angles. Your set of custom clone golf club iron sets though will have the right lie angles throughout the set, correctly matched to your needs.

A set of golf club iron sets is much more than just picking something off the rack. The finished clubs will only play as good as the components that go into them. A set of custom built clone golf club iron sets makes sure all the components are matched to your game. Your new clubs will cost less and make your game that much more enjoyable.

Golf can be an expensive game. Buying a new set of golf club iron sets could set your back several hundred dollars and there’s no guarantee the clubs will be good for your game. Taking the time to build a set of custom clone golf club iron sets can save you money and a lot of strokes on the course.

Information about the Author:

Golf Articles: http://www.article-buzz.com

One thing about golf that I have noticed is the constant advancement in equipment. Technological improvement in club heads, shafts & even grips and the marketing campaigns by the major manufacturers have us in the mood to upgrade our clubs every couple of years. Given the prices of name brand clubs it is difficult, if not impossible, for an ordinary duffer to keep up with the changes. Most of us are playing with a set that we’ve had for some time.

This is reality. Golf is not an inexpensive pastime. As a result, the average player is often suffering with inferior technology placing them at a disadvantage against others whose equipment is more up to date.

Here is the secret your golf ball already knows. The ball does not care what brand name golf club iron sets were used during the round or how much they cost. The ball knows the brief moment it spends in contact with the clubface determines the outcome of the shot. The technology in the club helps to make that shot the best it can be, not the brand name on the club. The club does make a difference everything else being the same.

Dooley Duffer, my constant friend and playing partner, found the perfect solution to the problem a couple years back. Dooley found a place online that manufacturers custom fitted golf club iron sets similar to the name brand clubs in quality and technology but at nearly one-third the price. The combination of low prices and superior quality made it possible for Dooley to replace his old set of store bought off-the-shelf clubs.

The best part about the whole experience was not the price though. The real benefit came from having those clubs custom fitted to Dooley’s specifications. This website has a special proprietary system that asks you for some easy to take measurements and then makes the proper club recommendations. Now Dooley no longer had to make set-up and swing adjustments to compensate for the poorly fitted store bought clubs but rather more appropriately he had clubs that were adjusted for him. That makes all the difference in building a repeatable swing.

I noticed that Dooley’s ball flight was higher and about a club longer than with his old set. He was now able to hit and hold more greens than before and you know that his scores dropped as a result. Dooley is very pleased of course. And now that a couple of years have passed he has his eye on a new set. He says he wants the technology upgrade but he has second thoughts because he likes his current set so well. Point is that he could upgrade his iron set for a few hundred dollars rather that the $800 or more for name brand unfitted clubs. Now he has the option to choose.

The average duffer would benefit from switching to custom fitted golf club iron sets just as Dooley did. They are easier and more comfortable to swing properly making the game easier to play and a whole lot more fun. Clone golf club iron sets are similar in technology and performance to name brands at much less the cost. Custom fitted clone golf club iron sets are the perfect answer for the average golfer who is on a budget.

Would you play better golf with a newer custom fitted set of clubs? Most likely you would. As you know, the golf ball doesn’t care about anything but that split second when it comes into contact with the clubface. Maybe you shouldn’t either.

Discover the secret your golf ball already knows and improve your golf game in the process. Read how fitted golf club iron sets outperform off-the-shelf name brand store bought clubs. Learn how you can get your own custom fitted clubs at discounted prices.

Information about the Author:

Golf Articles: http://www.article-buzz.com

Let’s face it, golf can be a pretty costly hobby to get into. And whilst no-one wants to pay any more than they need to, golfers worldwide want to ensure that the tools they use are going to enable them to play to their full potential, thus maximizing their enjoyment of the game, not to mention success.

This is where clone golf club iron sets have found a significant part of the golf club market.

With the quality and performance meeting the exacting standards of their branded cousins these days, there is no reason to feel concerned that your value-conscious purchase will be anything like substandard. Value, in your golf club purchase, does not mean you have to compromise at all these days.

Certainly, clone golf club iron sets are now manufactured to the same high standards as the better known brands, with great care being taken from design, through materials sourcing to manufacture and delivery.

From a technological point of view, just as much energy is expended as you would expect for the more well known brands. Yet clone golf club iron sets are followers of design and not innovators as such. The leading brands set the standards and the clone brand manufacturers follow.

It’s important to recognize that your financial outlay, even though it might be lighter on your pocket, will be still buying an excellent product. It’s just that costs are typically between 50-75% lower than the corresponding brands. Since most manufacturers used shafts and grips from the same sources, it’s down to the club head where the differences are seen.

Remember too, that manufacturers of clone golf club iron sets have to be very careful to observe patent and copyright laws, so there will be differences.

Legitimate clone golf club manufacturers produce clubs which have similar design elements to branded clubs, but are considered “distinct and different” enough, without breaching relevant registered patents.

In fact, clone golf club manufacturers work closely with the leading brands to ensure that they fight off the worse threat to their industry, that of counterfeit goods, illegally branded and passed off as originals – an increasing problem in many industries.

So, why would you ever buy a well-known brand, if on value and performance terms clone golf club iron sets are as good as they seem? Here are a few reasons:-

1. You get leading-edge technology, design and materials innovation.

2. You might just feel that you need to have a set of well-known clubs in your bag for reason other than performance, such as status when golfing with your company president.

3. It might just be that some players get extra confidence by spending all that cash on a branded product, in the belief that they will play better using these clubs.

Unlikely, but true!

Enough reason for you? To pay double or more for a quality of club that is second to none and with a posh and well-known brand name? Maybe – it is, of course, up to you.

In truth, as long as you have a reasonable set of clubs, it’s much more likely to be the technique you use, rather than something that costs twice the price, that makes the difference. Clone golf club iron sets will, without question save you money, without any compromise on quality.

So, if you are considering your next set of clubs right now, but can’t really justify the most well known, then don’t feel that you will be less well served if your purchase is for a brand new set of clone golf club iron sets, rather than something with a name you might see more on your TV screen.

Article Source: http://www.hobbyarticledirectory.com

(c) 2007 “Choosing Great Golf Clubs”. You want some new clubs, yet you don’t know how to choose. Well, there’s all the information you need at Martin Haworth’s golf website, Choosing Great Golf Clubs.

PGA tour golfers have a distinct advantage over amateur golfers. They have golf club iron sets that are specially made to their precise specifications. Pro golfers have talent and practice daily. If you do not have this talent and dedication, you are an amateur golfer looking for a way to save your money. Her is a way to save on your golf equipment and still be able to buy golf balls.

Brandt Snedeker fired a remarkable 63 in his final round at the 2007 Wyndham Championship with the help of his TaylorMade r7 driver. Now, you might be thinking that you should have what Brandt has in his golf bag. That way, you too can shoot a 63!

Eventually, you will come to the realization that you are not a professional golfer and won’t come close to shooting 63 in an 18 hole round of golf. You will find that you can save a lot of money by choosing discount golf club iron sets over name brand golf club iron sets. You should also understand that Mr. Snedeker probably had his clubs given to him by the company.

Take a look at what he has in his bag and the cost of those brand name golf club iron sets. The total would be a whopping $1809.00. Now, you may have that kind of money to throw around on a new set of name brand golf club iron sets but for those that don’t, there is an alternative.

Take a look at the clone golf club alternatives. The total for them is $535.00 for essentially the same golf club. That is a savings of $1278.00. Now that kind of savings would buy a lot of rounds of golf or the other rounds at the 19th hole.

Yes, the argument can be made that the name brand golf club iron sets perform better. That argument holds water if you are one of the top 100 or so golfer in the world. Odds are you are not. So, if you can’t tell the difference between the name brand golf club iron sets and the clone golf club iron sets, why not save over $1200.00 to be like Brandt Snedeker?

Another argument that does not seem valid is that the name brand golf club iron sets are built to your specifications. This is absolutely a good thing, but discount golf club iron sets can be just as easily built to your specifications for less. Any golf club can be built to your specifications, no matter the name on the golf club. You should have your golf club iron sets built to your specifications. Why not save the money and get more golf balls?

But what about the guarantee that comes with that name brand set of golf club iron sets? Well, guess what! Discount golf club iron sets can be obtained with a 30-day play guarantee. If you don’t like the clubs after playing them for 30-days, return them. How many name brand golf club iron sets will let you do that? You can’t lose!

Check out the prices for the name brand golf club iron sets in Brandt Snedeker’s golf bag and the knockoff golf club equivalent.

Golf Driver: TaylorMade r7 425 9.5 – $250.00 Power Max KC2 425 Ti with UST ProForce 65 shaft : Discount golf club driver equivalent – $120.50

3 Wood: Bridgestone 5 Tour Premium 14 – $150.00 Power Max KC2 Fairway : Discount golf wood equivalent – $49.00

Hybrid: TaylorMade Rescue mid 19 – $220.00 Power Max KC2 3 Hybrid : Knockoff hybrid golf club equivalent – $39.00

Iron Set: (3-PW)TaylorMade r7 TP – $800.00 Power Max KC2 with True Temper Dynamic Gold with Sensicore shaft : Knockoff golf iron set equivalent – $233.00

Wedge: (SW)Cleveland TA 588 54 – $110.00 SGS Black : Discount golf club wedge equivalent – $29.50

Wedge: (LW)Cleveland TA 588 58 – $110.00 SGS Black : Discount golf club wedge equivalent – $29.50

Putter: Odyssey White Hot XG Rossie – $169.00 Ecliptic Three Ball : Discount golf club putter equivalent – $34.50

Name brand golf club iron sets total: $1809.00, Discount golf club iron sets equivalent $535.00, a savings of $1274.00.

You would love to buy a new set of golf club iron sets iron sets and there are some out there that you have tried in the golf shop or reviewed on a golf equipment webstore BUT the prices are far too much over what your budget can afford. I am going to answer some of your questions or apprehensions about this.

Well, there are great alternatives to buying brand name golf merchandise. You may have heard from other people or read about knock-offs . You may have also read on brand name manufacturer sites or articles that you must not dare risk your cash on these types of clubs. Well, they do not want you to buy them because they have spent millions on developing their equipment. They may have developed the technology or design but in technological world we live in today it is not impossible to copy a design and reproduce it.

The benefit to you is that you will get what you are looking for at a low percentage of the price for brand name new clubs. You will get the clubs that will improve your game .

Most golf club iron sets iron sets are manufactured in Asia and clones are often made in the same manufacturing facilities. There may be small differences but the clubs will be basically the same and offer the same result when played and cost you 75% of the brand name clubs. There are more and more knock off builders opening all the time and the quality is getting superior . You can usually view them, get fitting details (how to determine if you need standard grips or not the shaft flex and length best for you and if your lie needs to be adjusted) and custom build the clubs (select the grips and shafts that are good for you) right at their website . In many cases if your order is over a certain amount, shipping may be free.

I have gone through this endeavor myself and recently acquired a new set of irons from a knock off retailer and I have hit them and I couldn’t really tell the difference from the brand names that would have cost me $1,200 and I only paid $186 with shaft customed and grips of my choice.

So, there you have it, your questions should be relieved and you are ready to start searching for your new set of clubs or individual golf club iron sets.